|
Post by greasemonkey on Mar 13, 2008 13:19:32 GMT -5
just found a spun bearing in my short block. looking for a sbc 350 flat top short block, reasonably priced will@goeaston.net
|
|
|
Post by bballantine on Mar 22, 2008 10:30:09 GMT -5
I've got one. 4 bolt GM block, stock rods, and crank. Flat top pistons, probably would pump out around 10.5 to 1. Call me (410)430-2438
|
|
|
Post by greasemonkey on Mar 22, 2008 10:38:57 GMT -5
how much
|
|
|
Post by greasemonkey on Mar 22, 2008 10:39:23 GMT -5
sorry my phones are out
|
|
|
Post by bballantine on Mar 22, 2008 10:43:44 GMT -5
I'd let it go for $500. I'll throw in a set of good iron heads with screw in studs that have been ported a little, they just need to be cleaned and polished and a set of 1.6 full roller rockers. If you decide you want it.
|
|
|
Post by greasemonkey on Mar 22, 2008 10:55:10 GMT -5
very interested, will call you on monday
Will
|
|
|
Post by bballantine on Mar 22, 2008 11:02:49 GMT -5
OK Will. Sounds good. Thanks
|
|