Post by ST on Jun 18, 2010 15:29:14 GMT -5
A phone call was just made to Charlie at Delmar. He said with some minor changes the chargers will be allowed to run at Delmar. 2 cars were inspected this past saturday night. The tech crew only had a few concerns:
1. Inspect all roll cages to be sure that ALL welds are 360 degrees around the tubing
2. All saftey belts must be mounted correctly at the right positions and angles. If you need to see a diagram look up NHRA regulations.
3. Must get approved racing wheels. They are concerned that with stock wheels that they may blow the centers out going into the turns.
Those were only and all concerns mentioned. For an event to take place a minimum of 10 cars must pass regulations.
1. Inspect all roll cages to be sure that ALL welds are 360 degrees around the tubing
2. All saftey belts must be mounted correctly at the right positions and angles. If you need to see a diagram look up NHRA regulations.
3. Must get approved racing wheels. They are concerned that with stock wheels that they may blow the centers out going into the turns.
Those were only and all concerns mentioned. For an event to take place a minimum of 10 cars must pass regulations.